about full automatic strapping machine

An Automatic Strapping Machine is a device used for packaging and strapping items, typically used in various industrial and commercial applications. Below are the steps to use an Automatic Strapping Machine, along with common issues and their solutions.

How to Use an Automatic Strapping Machine

1. Preparation:

   • Ensure the machine is properly connected to the power supply.
   • Load the strapping tape, selecting the appropriate width and material as needed.

2. Power On:

   • Turn on the power switch and wait for the machine to start.
   • Set the machine's strapping mode and tension according to your requirements.

3. Adjust Parameters:

   • Adjust the tightness and length of the strapping tape. This is usually done via the machine's control panel.

4. Place Items:

   • Place the items to be strapped on the worktable of the machine, ensuring they are correctly positioned.

5. Start Strapping:

   • Press the start button, and the machine will automatically complete the strapping process. The strapping tape will automatically wrap around the items and be tightened.

6. Remove Items:

   • After strapping is complete, remove the items from the worktable.

Common Issues and Solutions

1. Strapping Tape Not Feeding:

   • Cause: The strapping tape is jammed or the feeding mechanism is malfunctioning.
   • Solution: Check if the strapping tape is jammed and adjust its position. Clean any debris from the feeding mechanism.

2. Loose or Insufficient Strapping:

   • Cause: Incorrect tension settings for the strapping tape.
   • Solution: Adjust the tension of the strapping tape, either increasing or decreasing the tension as needed.

3. Machine Not Starting:

   • Cause: Power issues or internal circuit faults.
   • Solution: Check if the power supply is properly connected and ensure the voltage is stable. If the problem persists, contact a professional technician for inspection.

4. Strapping Tape Breaking:

   • Cause: Poor quality strapping tape or faulty cutting blade.
   • Solution: Replace the strapping tape with a higher quality one and check or replace the cutting blade if necessary.

5. Loud Noise During Operation:

   • Cause: Worn internal parts or lack of lubrication.
   • Solution: Regularly maintain and lubricate the machine, and check or replace worn parts as needed.

6. Strapping Tape Not Cutting:

   • Cause: Worn or malfunctioning cutting blade.
   • Solution: Check if the cutting blade is worn and replace it if necessary.

Maintenance and Care

1. Regular Cleaning: Clean the machine regularly to remove any strapping tape debris and dust.
2. Lubrication: Regularly lubricate the moving parts of the machine to ensure smooth operation.
3. Inspect and Replace Parts: Periodically inspect the machine’s parts and replace any that are worn or malfunctioning.
4. Professional Maintenance: Have a professional technician perform comprehensive inspections and maintenance periodically.

By using the automatic strapping machine correctly and performing regular maintenance, you can improve work efficiency, extend the machine's lifespan, and reduce the frequency of malfunctions.

If you have any other questions about bundling, please feel free to consult

Tel:+86-18206519878

Email:sales@kbwmachinery.com

WhatsApp & WeChat:+86 18206519878 available at any time

Website:www.kbwmachinery.com